Professional Plasma Cutters

How Plasma Cutters Work

Plasma cutters will work on any material that conducts electricity.
Plasma is the fourth state of matter and it's electrically conductive.
The Plasma Arc Process was started in the U.S. defence industry during WWII.

If you would like to know more about plasma cutting visit:
http://en.wikipedia.org/wiki/Plasma_cutting
What is Plasma Part One
What is Plasma Part Two
Here are the Top Brand names of plasma cutter machines.
Miller Plasma Cutters
ESAB Plasma Cutters
Lincoln Plasma Cutters
Hypertherm Plasma Cutters
Hobart Plasma Cutters
Hobart Plasma Cutters
Hobart Plasma Cutters

The machines are very good quality at a reasonable price, a tremendous savings for you to fit into your tool budget.


Plasma Cutter CUT-40D $449.99
Input voltage: 110/220
Freqency: 50/60
Input Current: 36Amps
No-load Voltage: 230
Output Current: 20-40
Rated Output Voltage: 96
Duty Cycle %: 30 at 40Amps, 100 at 22Amps
No-Load loss (w): 40
Efficiency (%): 85
Power Factor: 0.93
Insulation Class: B
Air Pressure (KG): 4.5
Weight (Kg): 9



Plasma Cutter CUT-40R $449.99
Input voltage: 110/220
Freqency: 50/60
Input Current: 36Amps
No-load Voltage: 230
Output Current: 20-40
Rated Output Voltage: 96
Duty Cycle %: 30 at 40Amps, 100 at 22Amps
No-Load loss (w): 40
Efficiency (%): 85
Power Factor: 0.93
Insulation Class: B
Air Pressure (KG): 4.5
Weight (Kg): 9



Plasma Cutter CUT-50D $549.99
Power voltage: single Phase 120/220 volts
Weight: 12kg
Dimension: 245x360x535mm
Cutting thickness: 1-16mm
Output Current: 50A
Duty cycle: 60%
Input capacity: 6.5KVA
No-Load Voltage: 225Volts
Air Pressure: 0.45MPA
Burner Inter Diameter: 1.0mm



CT-416 DC Inverter Plasma Cutter ARC MMA Welder TIG Welder $599.99
Input voltage: 220
Freqency: 50/60 hz

TIG
Input Current: 23.5A
Rated Output Current 160A
Current Range: 10-160
No-Load Voltage: 64V
Working Voltage: 16.4V
Gas Flow: 2-5L/Min
Way to Strike Arc: H/F Vibration

MMA
Input Current: 28A
Rated Output Current 150A
Current Range: 10-150
No-Load Voltage: 64V
Working Voltage: 26V
Way to Strike Arc: Touch

CUT
Input Current: 29A
Rated Output Current 40A
Current Range: 10-40
No-Load Voltage: 260V
Working Voltage: 96V
Nozzle Inside Diameter: 1.2mm
Air Pressure: 0.4Mpa
Gas Flow: 80L/Min
Cutting Thickness: 1-12mm
Way to Strike Arc: H/F Vibration




Plasma Cutter 40A Digital Display $449.99
Power voltage: single Phase 220 volts
Freqency: 50/60 Hz
Rated Input Currant: 22A
Rated Input Power: 4.85KW
Outside Fuse: 25A/250V
Outside Switch Type: 25A.250
No-load Voltage: 230V
No-load Loss: <130W
Output Current: 20-40A
Cutting Thickness: 1-12mm
Rated Duty Cycle: 35% at 40A, 60% at 30A, 100% at 23A
Efficiency: 0.85
Power Factor 0.7-0.9
Cover Protection Grade: IP21
Insulation Grade: F
Weight: 10Kg



  <>   <>  
Payment options
In addition to credit card payment, you can make payment by money order or certified cheque.
Allow 10 business days to receive product(s) if paying by cheque, company mailing address as follows.


Shipping

Product will be shipped same day or next morning for overnight purchases and upon confirmation of payment.
All products are tested for correction operation and all accesories checked before shipping.

Applicable taxes - Canada only.
Ontario residents pay additional 13% (PST/GST). Nova Scotia, New Brunswick and Newfoundland and Labrador residents an additional pay 13% (HST). All other Canadian provinces/territories pay additonal 5% (GST).
US and international buyers do not pay any taxes.
top
Home ICP-250 Air Purifier ICP-988 Air Purifier Induction Heaters Contact Us
© 2004-2008 Purifion Canada, All Rights reserved.